fiba世界杯官网 (关于fiba世界杯官网 玩法)

银灿科技量产工具(InnostorMPTool)是一个功能强大的U盘生产工具，可以用于生产U盘、光盘、软盘等格式的储存设备。并且有着计数器的功能，可以统计出品的合格率。

U盘量产即U盘批量生产的意思。在U盘出厂时候最后一道工序是量产。而现实中，水货U盘，或者需要制作带CD-ROM盘的U盘，方便u盘装系统，也用到量产。

而量产需要识别U盘的主控方案。也就是芯片方案。一般使用ChipGenius软件查看，并且对应的下载相关量产工具。当然提醒大家的是尽量买原厂正品U盘。芯片在量产之前首先要确定的就是自己U盘的主控芯片，确定之后才能找到合适的量产工具。主控芯片的分类有：群联、慧荣、联阳、擎泰、鑫创、安国、芯邦、联想、迈科微、朗科、闪迪。这些是可以通过ChipGenius检测出的。

1、USB-FDD（软盘模式）：启动后U盘的盘符是A，且容量只有1.44MB，至于FDD早就已经退出历史舞台了；

2、USB-ZIP（大软盘模式）：启动后U盘的盘符是A；USB-ZIP大容量软盘仿真模式，此模式在一些比较老的电脑上是唯一可选的模式，但对大部分新电脑来说兼容性不好，特别是大容量U盘。FlashBoot制作的USB-ZIP启动U盘即采用此模式。USB-ZIP+增强的USB-ZIP模式，在DOS启动后显示A:盘，有些显示C:盘(根据电脑的BIOS支持情况不同)，支持USB-ZIP/USB-HDD双模式启动，从而达到很高的兼容性。其缺点在于有些支持USB-HDD的电脑会将此模式的U盘认为是USB-ZIP来启动，从而导致4GB以上大容量U盘的兼容性有所降低。

3、USB-HDD（硬盘模式）：启动后U盘的盘符是C。（注意：这个模式在安装系统时容易混淆U盘和硬盘的C分区）；USB-HDD硬盘仿真模式，此模式兼容性很高，但对于一些只支持USB-ZIP模式的电脑则无法启动。HPUSBFW工具制作的U盘即采用此启动模式。USB-HDD+增强的USB-HDD模式，DOS启动后显示C:盘，兼容性高于USB-HDD模式。同样对仅支持USB-ZIP的电脑无法启动。

4、USB-CDROM（光盘模式）：启动后U盘的盘符是光驱盘符。USB-CDROM光盘仿真模式，DOS启动后可以不占盘符，兼容性比较高，新老主板一般都可以。优点可以像光盘一样使用(如，进行Windows系统安装)。缺点，我们将失去对这部分U盘空间的写权利，剩余空间会被识别成为一个独立的U盘，可以为Removable盘，当然也可以做成Fixed盘，进一步分区；

错误代码说明：

11:Open Execute File error!;

12:Can't support NAND Function!;

13:Send Execute CMD fail!;

14:Check busy after Send Execute CMD!;

15:Can't support NFTL Function!;

16:Device Setup already, please erase first!;

17:Can't support LED Function!;

18:Check busy after Execute step!;

19:Send GetMap CMD fail!;

20:Return Channel not match!;

21:Return Bank not match!;

22:Return SizeofIDCode not match!;

23:Return Flash ID not match!;

24:Check busy after TestGetMap Step!;

25:TestConfig Send IODriving_CMD fail!;

26:TestConfig Send SET_ECC_CMD fail!;

27:TestConfig Send SET_ACTiming_CMD fail!;

28:TestConfig Send ConfigDevice_CMD fail!;

29:TestConfig Send ConfigDevice_CMD fail!;

30:Check busy after Send ConfigDevice_CMD!;

31:Check busy after Test Config Step!;

32:TestScanINIDFT Send CMD fail!;

33:Check busy after TestScanINIDFT Step!;

34:TestReadPhysical Send CMD fail!;

35:TestCopy Send Init_NFTL CMD fail!;

36:Check busy after Initial NFTL!;

37:TestCopy Write fail!;

38:TestCopy Read fail!;

39:TestCopy RW Compare fail!;

40:Check busy after TestReadPhysical Step!;

41:TestErase Send CMD fail!;

42:Check busy after TestErase!;

43:Open USB FW File error!;

44:Open SATA FW File error!;

45:Send Write FW/Info CMD fail!;

46:Check busy after Send Write FW/Info CMD!;

47:Send Read FW/Info CMD fail!;

48:Check busy after RW Info and FW!;

49:Verify Info fail!;

50:Write Descriptor fail!;

51:Can't support Partition Function!;

52:The Supported System IDs is incomplete!;

53:open Image file fail!;

54:Set Partition Fail!;

55:Send Write Partition CMD fail!;

56:Write CD-ROM partition fail!;

57:Send ReadCapacity CMD fail!;

58:Send Init_NFTL CMD fail!;

59:Send Write Partition CMD fail!;

60:Check busy after Partition!;

61:Check busy after Copy Test!;

62:This Format type not support!;

63:This Windows version not support!;

64:Can't get Diskletter!;

65:Write Label name fail!;

66:TestFormat fail!;

67:Check busy after Format!;

68:TestExecute ReInitial-Erase fail!;

69:Inquiry Fail!;

70:Can't Initial device , now run FW!;

71:Check busy after Re-Initial erase Fail!;

72:TestExecute Stop NFTL fail!;

73:Send LEDC CMD fail!;

74:TestFormat verify BPB fail!;

75:Lock Disk fail!;

76:UnLock Disk fail!;

77:Get lock handle fail!;

78:Get Total Sectors fail!;

79:Open PC FW File error!;

80:TestReadPhysical bad block over default setting!;

81:TestReadPhysical Info-Block is bad!;

82:Execute File not found!;

83:TestReadPhysical Total size not enough!;

84:TestReadPhysical Get total block too much!;

85:TestFormat Create MBR error!;

86:TestFormat Verify MBR fail!;

87:Read Capacity fail!;

88:Enable Optitmize for Performance fail!;

89:Relink drive fail!;

90:Disk size small than Media Partition!;

91:Disk size small than Force capacity!;

92:Can't support TEPF Function!;

93:Refresh device fail!;

94:Send Terminate CMD fail!;

95:Check Unit Ready Timeout!;

96:Innostor unlock CMD fail!;

97:Innostor lock CMD fail!;

98:Get Serial number fail!;

99:Can't find good block to write FW!;

100:Can't find good block to write Info!;

101:TestConfig CT value error!;

102:Hidden size incorrect!;

103:Preload File Fail!;

104:Can not find default Stor-String!;

105:Write Info-Table fail!;

106:Get Parameter fail!;

107:Get Flash vendor fail!;

108:Get Driving setting fail!;

109:Can not Get File system!;

110:Check Innostor device fail!;

111:Check Preload files fail!;

112:Cluster size not match!;

113:Serial number over setting!;

114:Not support ISF!;

115:Set Permissions fail!;

116:Can not support this version OS!;

117:Not support this controller!;

118:Support ISF Only!;

119:Bad Block too much!;

120:Serial number length not match!;

121:Set parameter fail!;

122: Device size over range!;

300:SORTING_INVALID_HANDLE!;

301:SORTING_SUCCESS!;

302:SORTING_EVENT_FUNCTION_FAIL!;

303:SORTING_STATUS_FUNCTION_FAIL!;

304:SORTING_SET_PARAMETER_FAIL!;

305:SORTING_GET_PARAMETER_FAIL!;

306:SORTING_SET_PATTERN_FAIL!;

307:SORTING_SET_TABLE_FAIL!;

308:SORTING_ERASE_FAIL!;

309:SORTING_WRITE_FAIL!;

310:SORTING_READ_COMPARE_FAIL!;

311:SORTING_GET_RESULT_FAIL!;

312:SORTING_NOT_TLC_FALSH!;

313:SORTING_FLASH_POWER_ONOFF_FAIL!;

314:SORTING_SET_FEATURE_FAIL!;

315:SORTING_SET_BMT_FAIL!;

316:SORTING_BAD_BLOCKS_TOO_MUCH!;

317:SORTING_NOT_SUPPORT_MULTI_CHANNEL_MULTI_BANK!;

318:SORTING_SORTING_DATA_LENGTH_MISMATCH!;

319:SORTING_SORTING_SET_ALPHA_TABLE_FAIL!;

320:SORTING_VERIFY_IDBT_FAIL!;

321:SORTING_QUICK_PARAMETER_FAIL!;

322:SORTING_SORTING_INVLIAD_SORTING_LEVEL!;

标签：fiba世界杯官网

版权声明：本文由用户上传，如有侵权请联系删除！